📋 Table of Contents
- Why the 4Runner Is the #1 Overland Platform
- Use current listings, manufacturer documentation, and qualified installer estimates when planning this component.
- Use current listings, manufacturer documentation, and qualified installer estimates when planning this component.
- Use current listings, manufacturer documentation, and qualified installer estimates when planning this component.
- DIY vs. Shop: What to Do Yourself
- 4Runner Overland FAQ
Why the 4Runner Is the #1 Overland Platform
Ask ten overlanders what they'd buy if they were starting over, and at least six will say a Toyota 4Runner. That number isn't an accident. The 5th gen 4Runner (2010–2024) is built on a body-on-frame platform with a solid rear axle, a true transfer case with low-range gearing, and a Toyota powertrain reputation that has been proven over decades of hard use across every continent. It doesn't have the Jeep Wrangler's flex, but it compensates with far better on-road behavior, a proper interior, and a reliability record that makes mechanics nervous because the trucks rarely show up.
The parts ecosystem is enormous. More companies make 4Runner-specific suspension, bumpers, skid plates, and rack systems than any other platform outside of the Wrangler. Trail Proven and TRD Pro variants proved that Toyota takes off-road seriously, and the aftermarket took it even further. From a bolt-on rock slider to a full Icon coilover system, almost every upgrade you can imagine has been fully engineered specifically for the 5th gen.
Consult the linked manufacturer or seller listing for current specifications, fitment, operating limits, and instructions before purchase or installation.
Prices, availability, installation cost, and configuration vary. Use current seller listings, manufacturer documentation, and qualified installer estimates when planning this component.
Build planning tier
Prices, availability, installation cost, and configuration vary. Use current seller listings, manufacturer documentation, and qualified installer estimates when planning this component.
Suspension: Bilstein B8 5100 Front & Rear Shocks for 2010–2024 4Runner
Bilstein B8 5100 Front & Rear Shock Set for 2010–2024 Toyota 4Runner
Key features
- Direct-fit front and rear set for 2010–2024 4Runner applications
- Front ride-height adjustment supports a modest leveling lift
- Monotube construction manages heat better than many OEM twin-tube shocks
- Practical entry-level suspension upgrade for loaded touring and rough roads
The Bilstein 5100s are a practical first suspension upgrade for the 5th gen 4Runner. With a compatible rear solution and a professional alignment, the set can improve ride control on graded dirt while maintaining street-friendly behavior.
Tires: Cooper Discoverer AT3 XLT — 285/70R17
Cooper Discoverer AT3 XLT — 285/70R17 (Set of 4)
Key features
- Strong all-terrain tread that genuinely handles mud, sand, and rock
- 285/70R17 is the ideal size for a lifted 5th gen — no rubbing
- Quieter highway manners than BFG KO2 at this price point
- 3-Peak Mountain Snowflake rated for light winter use
- Best value all-terrain on the market for this platform
Prices, availability, installation cost, and configuration vary. Use current seller listings, manufacturer documentation, and qualified installer estimates when planning this component.
Toyota TRD 4Runner Skid Plate Set (2014–2019)
Genuine Toyota 4Runner TRD Skid Plate PTR60-89190 — 2014–2019 4Runner
Key features
- Explicitly fits 2014–2019 Toyota 4Runner applications.
- Uses the vehicle’s existing attachment mounts for no-drill installation.
- Provides front underbody protection while retaining access to service points and tow hooks.
Recovery Gear: Boards, Rope & Shackles
TRED Pro 1100 Recovery Boards (Pair)
Key features
- 1,100 kg load rating — handles loaded 4Runners easily
- Better traction geometry than MaxTrax at a lower price point
- Integrated leading-edge blade for clearing a path
- Nesting design mounts cleanly to a roof rack or rear bumper
Pair the TRED Pro boards with a kinetic recovery rope and two rated D-ring shackles and you have the tools to self-recover from the most common stuck situations — soft sand, mud, and light snow. A Bubba Rope 3/4" x 30' kinetic rope and a pair of WLL-rated 3/4" D-rings cover you for vehicle-assisted recoveries.
Shop Kinetic Ropes on Amazon ↗Roof Basket & Lighting
A Yakima LoadWarrior gives you a universal-fit roof basket that works with factory crossbars and carries recovery boards, camping gear, or a spare tire up top. It's not the most beautiful rack on the market but it fits the budget and works well for entry-level builds.
For auxiliary lighting at this tier, a pair of Nilight 4" LED pod lights mounted to the ditch area or A-pillars gives you enough forward throw for slow-speed trail navigation and camp setup. They're not Baja Designs, but they work well enough at this price. Wire them to a dedicated relay with an inline fuse — don't tap them directly to existing circuits.
Prices, availability, installation cost, and configuration vary. Use current seller listings, manufacturer documentation, and qualified installer estimates when planning this component.
Build planning tier
Prices, availability, installation cost, and configuration vary. Use current seller listings, manufacturer documentation, and qualified installer estimates when planning this component.
Suspension: Old Man Emu BP-51 4Runner (2010–2023) 2–3-inch Lift Kit
Old Man Emu BP-51 4Runner (2010–2023) 2–3-inch Lift Kit
Notable features
- Bypass shock technology — separate compression and rebound circuits
- Adjustable damping with external reservoir for heat management
- Engineered specifically for the 5th gen 4Runner — optimal geometry
- Tuned for loaded touring, not just weekend wheeling
- ARB/OME backing means dealer support and warranty
The BP-51 coilovers are a serious step up from the Bilstein 5100s. The bypass design means you can tune the damping for street comfort without sacrificing off-road performance. At this level, the 4Runner will ride noticeably better loaded with gear than an unmodified stock truck does empty. Expect 2.5–3" of lift in the front with correct spring rates for your load.







